Bike Service
|
|
Superior€149 |
Premium€89 |
|---|---|---|
|
Front and rear wheels removed |
v | v |
|
Cassette removed and cleaned in the parts washer |
v | v |
|
Diagnostic tool connected, fault codes checked |
v | v |
|
Service interval set |
v | v |
|
Update carried out |
v | v |
|
Front and rear wheels and hubs cleaned; hub smoothness and play checked; lubricated |
v | v |
| Chain removed and cleaned in a parts washer, refitted, chain length checked | v | v |
| Front and rear brake discs checked for wear and re-adjusted, set to be free of grinding | v | v |
| Front and rear brake calipers cleaned; pads and calipers checked; hydraulic brake system checked for leaks | v | v |
| Rear derailleur cleaned; derailleur pulleys cleaned | v | v |
| Front and rear derailleurs and derailleur hangers adjusted; H and L stops checked | v | v |
| Suspension fork and shock absorbers cleaned; seal sleeves cleaned | v | v |
| Inspected the frame, checked all visible bolted joints | v | v |
| In the stem and handlebar area, tightened the screw connections with a torque wrench | v | v |
| Sprayed the suspension fork and shock absorber seals, Vario seat post and suspension seat post with silicone spray | v | v |
| Suspension components checked and adjusted where necessary | v | v |
| Inspect the frame, checking all visible bolted joints | v | v |
| Apply lubricant to all moving parts (rear derailleur, full-suspension pivot joints, front derailleur, bottom bracket, pedals, headset, etc.) | v | v |
| Components cleaned using a parts washer with a brush, then rinsed with clean water and dried | v | v |
| If necessary, check compliance with the Road Traffic Regulations (bell, white front reflector, red rear reflector, reflective strips on tyres or reflectors in the rim, pedal reflectors) | v | v |
| Check workshop order; ensure all orders have been completed | v | v |
| After lowering the assembly stand, check the ergonomic settings (brake lever, gear lever, grips, etc.) | v | v |
| Headset checked for play and smooth operation | v | v |
| Seat tube greased and adjusted to the customer’s height | v | v |
| Suspension fork removed, headset cleaned and greased | v | x |
|
Rear and front wheel bearings completely removed, cleaned and greased; bearing play adjusted |
v | x |
| Check of bottom bracket | v | x |
| Check gear and brake cables: ensure they move smoothly and check for spliced cables or damaged Bowden cables | v | x |
| Test ride | v | v |